+86-13770716183           marketing@ainkjet.com
 You are here: Home » DTF » DTF Hot Melt Powder
DTF-Powder1
DTF-Powder2
DTF-Powder3
DTF-Powder4
DTF-Powder5
DTF-Powder3
DTF-Powder2
DTF-Powder5
DTF-Powder7
DTF-Powder6
DTF-Powder4
DTF Hot Melt Powder
 
DTF Hot Melt Powder is formulated to intensify the colors of your prints, delivering results that captivate the eye with their brilliance. Whether you’re working with cotton, polyester, or a blend of materials, DTF Hot Melt Powder adapts seamlessly, offering versatility across a wide range of substrates.
With DTF Hot Melt Powder prints that fade over time. The adhesive properties of our Hot Melt Powder contribute to long-lasting, wear-resistant designs that stand the test of time. Boasting exceptional adhesion and washing resistance, it precisely adheres to ink, not just the film. Curing at 300°F or 150°C.
 
Feature
 
1.DTF print powder is suitable for all textile printing industry.
2.DTF print powder is a finely ground adhesive materials specifically manufactured to increase heat transfer opacity and adhesion.
3. It is a green product that is harmless to the human body.
4. Good chemical stability, can be stored at room temperature for a long time without deterioration It can obtain excellent washing fastness.
 
Technical Specifications
Size: 80Mesh/120Mesh/200Mesh/customized 
Color:  White
Melting Temperature: 135-145℃
Melting time: 8S-15S
Storage condition: Sealed, Cool, Dry
 
AIN Hot Melt Powder Advantages：
 Temperature Resistance: Stable at -50°C - 180°C, ensuring product stability.

 Abrasion Resistance: Highly wear, durable and tensile resistant.

 Moisture Resistance: Thermoplastic polymers absorb moisture for long - term stability.

 Acid/Alkali Resistance: Withstands strong acid and alkali corrosion.

 Corrosion Resistance: Guards against oxidants and oils.

 Heat Resistance: Withstands high temperatures.
 
Tips: DTF hot melt powder must be sealed and applied promptly after use, otherwise the hot melt powder will condense into blocks due to moisture, and the powder will be uneven when spread, affecting the transfer effect.
 
Powder Classification
AIN DTF hot melt powder has coarse 80 mesh, medium 120 mesh, and fine 200 mesh. It can be formulated according to customer requirements for specific applications.

 Washing marks with small words can match fine powder and hot film.

 Large area pattern can choose warm and cold film and coarse powder.

 For the general pattern, hot melt glue powder recommended to
choose medium - fine powder.

 Normally, hot melt powder should be sealed, in order to avoid affecting
the use effect of shaking powder.

 Due to the difference of printer, ink, ICC curve of board and substrate fabric of each user, we can develop a perfect heat transfer film plans according to our own condition.

 If the film surface absorbs moisture or dust caused by long-term exposure, the exposed section should be cut off and then printed again, in order to avoid affecting our judgment.
Handle the film gently, avoid compression and contusion, pay attention to the strength and Angle when cutting the film, in order to avoid making deep scratches.
Classification Feature

80-170um Soft DTF Powder
 		 Soft DTF Powder easy to melt, soft and smooth after transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts.

120-250um Rough DTF Powder
 		 Rough DTF Powder easy to melt and suit for rough fabrics, such as denim, non-woven fabrics, and linen.

Stretch Resistant DTF Powder
 		 Stretch Resistant DTF Powder very easy to melt, the transfer finished product is stretch-resistant, its really good for stretch fabrics.

Anti-sublimation DTF powder
 		 Anti-sublimation DTF Powderis more suitable for Dark fabrics, White powder for Light ones. It is best to mix it with the standard white DTF powder to improve washability.

Highly Breathable DTF powder
 		 Highly Breathable DTF Powder provides a more breathable print with a smooth feel and softness .

 
DTF-PET-FILM1
DTF-PET-FILM2
DTF-PET-FILM4
DTF-PET-FILM6
DTF-PET-FILM7
DTF-PET-FILM3
DTF-PET-FILM5

Method and Steps
1、The pattern to be applied through photoshop or other image processing software to complete the preprocessing, then input into the digital printing software.
 
2、The printer should make the best match between the consumables such as the
matching hot transfer film, ink, and image color ICC and the software. The printed pattern is guaranteed to be bright and stable.
 Printing humidity condition should remain 50%-60%；
 Indoor temperature should remain 20-30℃；
 The temperature of printer rear heating board should remain 38℃~45℃.

3、After printing the pattern, let the film flow into the automatic powder shaker machine.
Due to ink and other reasons, please pay attention to climate change, we can be turned on the front and rear heating function to ensure stable quality during low temperature in winter.Baking machine connected heating board is also recommended to 40-50 degrees.

4、Generally, the baking speed after shaking powder is appropriate to match the printing
speed. The temperature is best to be warm first and then hot. It is appropriate to
control the temperature of the film surface between 70 and 90℃.

5、After baking, the finished film with pattern should be printed on the surface of
substrate clothing and other materials by heat transfer printing machine
as early as possible.
 Heat printing temperature: 140-160℃,
it can be adjusted by the physical properties of hot melt powder;
 Heat printing time: 7sec to 10se;
 Heat printing pressure: 5--7KG;
 According to the different fabric matching

  • Ink flow

    Reasons
     
    1、It becomes easy to flow ink where has powder impurities or crush wounds 2、The heating board is not open after printing
     
    Solutions
     
    If the ink flow is due to the poor absorption, we can try 1, reduce the proportion of white ink setting, appropriate to reduce the amount of white ink 2, increase the temperature of the printer heating board can also improve the pass rate 3, board heating can help ink activation and then reduce ink flow phenomenon

  • Powder shaken unclear

    Reasons
     
    Wet weather, humidity, strong static electricity, it needs to check when the edge of the pattern is unclean.
    1、 Whether high humidity or low temperature
    2、Whether the strength of powder shaking machine is insufficient
    3、Whether the printing interval is too long without powder caused by drying glycerin diffusion
    4、 Whether ink misting on heads
     
    Solutions
     
    If it is found that the pressure wheel position or large blank area shaking is not clean, it should be electrostatic influence or powder damp or too fine, you can take measures as appropriate.
    Generally, increasing the temperature of the heating board after printing and shake powder machine connected board can reduce the edge powder shaken unclear.

  • Powder holes

    Reasons
     
    Ink water and glycerin boiling evaporation with high temperature and short time baking dried, which pulls holes out of the coating and film
     
    Solutions
     
    It' better to give priority to medium and fine powder, a little coarse powder or even no coarse powder, it works best when baking dried in the low and high temperature section for a long time, it works best when baking dried in the low and high temperature section for a long time, it can be gradual to dry oil and water and melt glue thoroughly, but no violent reaction. The resulting film is flexible, elastic, smooth and dry. If the powder machine begins with a slightly poor conditions, it's necessary to make use of the function of preheating chopping board to heat and steam away some water in advance to reduce the burden, dry them then shake powder.

  • oily or damp

    Reasons
     
    Baking dried patterns or pasted and transferred patterns become oily and damp
     
    Solutions
     
    It belongs to the phenomenon that the glue is not baked thoroughly, the water and glycerin in the ink cannot be thoroughly baked and then reversed. Generally speaking, single sheet operating version with 120 degrees low temperature for a long time through it best. As powder is limited by the length of the powder machine, so we can try to raise the connected board appropriate high temperature to make the water and glycerin evaporation in advance might also help

  • Flaking powder

    Reasons
     
    The blank place powder around the pattern sticks the coating after heat transfer printing
     
    Solutions
     
    May due to the heat transfer printing pressure is too high, which makes the film ink absorbing layer damage peeling or fabric surface size easy to stick the coating. Generally, as long as the temperature and pressing time can meet the requirements of sticking firmly, it can be easily solved when adjust the pressure as small as possible down
 
Applications of DTF Printer
Commonly used products such as T-shirts, hats, backpacks, lanyards, shoes and more to create unique fashion pieces. It can also be used in denim clothes, non-woven bags, gift bags, pearl clothing, baseball caps, fabric gift boxes, etc. Make your travel outfit unique .
 T-shirt                               Denim/Jeans
 Canvas                             Hoodies
 Backpacks                       Lanyards
 Shoes                                Gift Bags
 Baseball Caps                 Fabric Gift Boxes
 Sweaters and more......
DTF Accessories
DTF Accessories inculding DTF textile inks, DTF shaking powder and PET Film with high quality accessories for DTF printing with affortable price.
DTF PET Films​​​​​​​
DTF film can be transferred on a wide range of fabrics. Capable of printing to shirts, sweaters, hoodies, pullovers, canvas, denim, and more! Our DTF films have excellent ink absorption for high-precision printing. Use our film you will achieve high-quality, breathable, and smooth prints.
DTF Ink
DTF textile printing ink is highly compatible with print Epson heads. You can directly print your designs on different textiles and fabrics using Direct to Film Ink technology. AIN offers different colors of DTF inks such as W, Y, K, M, C, Or, Gr, and also fluorescence pink & fluorescence yellow.​​​​​​​

DTF Hot Melt Powder​​​​​​​
Unlike DTG technology, DTF requires no pre-treatment.The most important factor is DTF Powder. DTF powders are specially designed to use with DTF printing process. Our DTF powders are slow drying and easy to cold tear. Which will help you get excellent transfer printing results.​​​​​​​

AINManufacturer
Accurate Innovation Natural In Love We Print
Customized Inkjet Printer Manufacturer 
AINKJET is an integrated factory which not 
only produces special application for the group, but also offers various OEM services 
for our dealers.

QUICK LINKS

PRODUCT CATEGORY

SUBSCRIBE

Get Price
Copyright © 2024 AINKJET. All Rights Reserved. Sitemap I Privacy Policy